4V200 Series Solenoid Valve, Pneumatic Control Valve
4v210-08 Pneumatic Electric Solenoid Valve Directional Control Air Magnetic Valve 12V 24V 220V 4v210
Pneumatic valve, single solenoid, 5 way, 1/4″ PT port, AC 220V, terminal entry, internal pilot, 200 seriesSolenoid Air Valve 4V21008A –
General Introduction
5/2 way is a five port, two position valve that will put a fluid or air into one end of a double acting device as well as allowing the other end vent to exhaust. … Normally closed (N.C.) means that when the solenoid valve is not energised the supply pressure.
Product Features
1. Pilot-oriented mode: Choose between internal or external for tailored control.
2. Structure in sliding column mode: Ensures good tightness and sensitive reaction.
3. Three position Solenoid Air Valves: Offers three kinds of central function for your choice.
4. Double control Solenoid Air Valves: Feature a memory function consistent operation.
5. Internal hole adopts special processing technology: Results in little attrition friction, low start pressure and long service life.
6. No need to add oil for lubrication: Maintenance-free operation enhances convenience.
7. Integrated valve group formation: Save installation space for compact setups.
8. Affiliated manual devices: Simplify installation and debugging processes.
9. Several standard voltage: Accommodate various power supply standards.
Product Application
Typical applications include water treatment, chemical industry, marine, petrochemical and light industry, metallurgy, power station.
Ordering code
Technical Specification
Model | 4V210-06 | 4V220-06 | 4V230C-06 | 4V230E-06 | 4V230P-06 | 4V210-08 | 4V220-08 | 4V230C-08 | 4V230E-08 | 4V230P-08 |
4A210-06 | 4A220-06 | 4A230C-06 | 4A230E-M06 | 4A230P-06 | 4A210-08 | 4A220-08 | 4A230C-08 | 4A230E-08 | 4A230P-08 | |
Position Number | Two-position Five-way | Three-position Five-way | Two-position Five-way | Three-position Five-way | ||||||
Effective Sectional Area | 14mm2(CV=0.78) | 12mm2 (CV=0.67) | 16mm2 (CV=0.89) | 12mm2 (CV=0.67) | ||||||
Joint Pipe Bore | Air Inlet=Outlet=Exhaust= G1/8″ | Air Inlet=Outlet=G1/4″ Exhaust=G1/8″ | ||||||||
Working Medium | 40 Micron Filtered Air | |||||||||
Motion Pattern | Inner Guide Type | |||||||||
Working-pressure | 0.15~0.8MPa | |||||||||
Max.Pressure Resistance | 1.2MPa | |||||||||
Operating Temperature | 5~50°C | |||||||||
Voltage Range | ±10% | |||||||||
Power Consumption | AC:4.5VA DC:3W | |||||||||
Insulation&Protection Class | IP65 / F Class.IP65 | |||||||||
Wiring Form | Lead Wire or Connector type | |||||||||
Highest Action Frequency | 5 Cycle/Sec | |||||||||
Shortest Excitation Time | 0.05 Second |
Overall Dimensions
Installation Instructions
1. Before installing, be sure the valve hasn’t been damaged via transportation.
2. It’s suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5. Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
7. To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
8. After installing, please use the manual override to test valve first.
product Details
Related products
-
Pneumatic Valve
QE,XQ Series Quick Exhaust Valve
-
Pneumatic Valve
ASC RE Flow Control Valve
-
Pneumatic Valve
4HV Series Hand Lever Valve Pneumatic Components Air Tools
-
Pneumatic Valve
3V1 Series 3/2 Way Single Solenoid Valve