PZA Union Cross Push In Tube Fitting

Pza Four Way Connector Pneumatic Fitting Air Pneumatic Connector

Category Pneumatic Fitting& Air Tube

Characteristics

◆ Quick installation, simple and flexible, space-saving.

◆ The tube ftting comes in a wide variety of models to meet all your needs in pneumatic piping.

◆ Even after installation, the direction of tubing can be changed freely.

◆ The release ring adopts the llipse design to make it more convenient and labor-saving for disconnection.

◆ All taper threads are pre- coated with Teflon with fine seal performance.

◆ All fttings are equipped with the internal hexagonal holes. It is easy for them to be mounted in the narrow places.

Pza Pneumatic Compressed Air Pipe Tube Fittings for Airhose PU Pipe Od 4mm 6mm 8mm 10mm 12mm 14mm 16mm

Pneumatic fitting, push in fitting union cross is used to connect together four tubes in all 90° directions. All tubing connections are of the same diameter. Union cross pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″.

All Wolun’s push-in fittings pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Technical Specification

Fluid		Air. if you use liquid please contact factory
Max Working Pressure		1.32Mpa(13.5kgf/cm2 )
Pressure Range	Normal Working Pressure	0~0.9Mpa(0~9.2kgf/cm2)
	Low Working Pressure	-99.99~0Kpa(-750~0mmHg )
Ambient Temperature		0~60ºC
Application Pipe		PU tube, Nylon tube
Color of Release		Black/Blue/White
Material of Core		Plastic/Zinc alloy
Modle Number		PZA-4/6/8/10/12