CS1-J,CS1-JP,CS1-JN Detector magnético para cilindro compacto SDA

Interruptor magnético Airtac CS1-F/U/S/J/G/M Sensor magnético de cilindro Interruptor Sensor de cilindro

Categoría Accesorios para cilindros neumáticos

Refer to the cylinder switch precautions, when using magnetic induction switch, it should not exceed the specifications limit.
In the usage of two-wire magnet switch, it must be connected with the load, otherwise it will cause the damage to the switch.
When using DC power supply, the brown wire should be connected to the positive potential(+), and the blue wire should be connected to the negative potential-). Otherwise, the indicator light of the switch will not light, but the sensor switch can work normally. And the switch will not be damaged, as long as the two lines are reversed, the indicator light will work normally

CS1-J Magnetic Switch Magnet Sensor Proximity Sensor Pneumatic Cylinder Sensor Pneumatic Parts SMC Airtac type Switch Magnetic

General Introduction

Reed sensor also called magnetic switch,reed sensor is applicable for position determination of pneumatic and/or hydraulic cylinder and piston pump.lt
also can be usedslinit switch. When the magnetic object approaches, the reed closes and sends out switch signal through magnificatio.
Compared with inductive sensor, it h tlie following strongpoints: can be installed in metal colsely and side by side and detect through met
al object. Its detection distance subjects to the intensity of magnetic field of detected object. Reed sensor is not applicable in the occasi
on of sevee vibration.

Product Feature

1.The CS1-J series magnetic switches are used for SDA Compact cylinders.
2. The default length of cable is 1.5meter, more length can be selected,like 2m,3m,4m,5m…
3.Mounting it conveniently on the cylinder.

Código de pedido

MODELO:	CS1-J-2

CS1	-	M	-	2
Sensor magnético		J:Basic two cables		Longitud del cable
		JB:Normal closed		Blank:1.5m
		Three cables		2m
		JN:NPN type		3m
		JP:PNP type		4m
				5m

Característica

Característica	tipo
	CS1-J	CS1-JB	CS1-JN	CS1-JP
Lógica de conmutación	SPST NO	SPST NC	Eléctrico sin contacto; NO
Tipo de sensor	Lengüeta de contacto		Non-contact solid NPN	Non-contact solid PNP
Tensión de alimentación	5-240 V CC/CA	5-120V DC/AC	5~30V CC
Corriente de conmutación	100 mA máx.		200 mA máx.
Índice de contacto	10 W máx.		6 W máx.
Consumo interno de corriente	No		20mA máx@24V (Interruptor activo)
Caída de tensión	2,5 V máx@100 mA		0,5 V máx@200 mA
Corriente de fuga	No		0,01 mA máx.
Indicador	LED rojo		LED rojo	LED verde
Cable	3.2Ф, 2C, Resistencia al aceite marrón (PVC)		3.2Ф, 3C, Resistencia al aceite negro (PVC)
Sensibilidad (Nota 1)	40Gauss
Frecuencia máxima de conmutación	200 Hz		1000 Hz
Temperatura	-10~70℃
Choque (Nota 2)	30G		50G
Vibración (Nota 3)	9G
Clasificación de la protección	IEC 529 IP67(NEMA6)
Circuito de protección	Sin		Con circuito de protección
Esquema del circuito