Pneumatic flange angle seat valve

Category

Pneumatic steam angle valve is widely used in beer and beverage can line, printing and dyeing textile, gas industry, pharmaceutical and medical equipment, chemical industry, high temperature sterilization, foaming machinery, water treatment equipment, etc. Pneumatic angle seat valve is widely used in short-term frequent start-up, with the characteristics of sensitive response and accurate action. With the use of solenoid valve, pneumatic control can accurately control the flow of gas and liquid. It can realize the requirements of accurate temperature control and liquid dropping. Application of angle seat valve to control steam quantity and accurate temperature control in damp heat sterilization cabinet

ASK FOR A QUOTE

Flange  Pneumatic Angle Seat Valve

pneumatic piston angle seat valve main connection methods are: thread, flange, welding, clamp connection. The angle seat can save space by keeping the flow rate. It uses a single acting pneumatic actuator with spring safety protection to operate the guide angle seat valve. When using, it should be normally open or normally closed.

The product is made of stainless steel and polytetrafluoroethylene. It can be used in most gas, liquid, steam and corrosive occasions. It has a radiator to protect the actuator. It ensures a long service life of the valve.

There are single acting and double acting. Single action (pneumatic head is usually a hole); working principle; according to the function of spring return to open and close, it is divided into normally open type and normally closed type.

Double acting (pneumatic head usually has two holes); working principle: air supply controls its switch. (according to the customer’s requirements, double action plus spring return can also be selected for more accurate control

Overall Dimension of Stainless Steel Angle Seat Valve 

Stainless Steel Body With Plastic Actuator

Stainless Steel Body With Stainless Steel Actuator

DN40 1 1/2'' Flanged Air Actuated Angle Seat Piston Valve Pneumatic 1

Technical Data of Angle Seat Piston Valve:

 

Medium Temperature
-10 to +180℃
Ambient Temperature
-10 to +60℃
Max. Working Pressure Range
1.6 MPa
Working Medium
Netral and Aggressive Liquid, Gas
Working Pressure
0.4 to 0.8 MPa
Body Material
SS304, SS316
Seal Material
PTFE
Connection Size
1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3”, 4”
Port Connections
Threaded, Flanged, Welded, Clamp
Nominal Diameter
DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100
Safety setting in case of power failure
Normally Closed, Normally Open

Related products

es_COSpanish
es_COSpanish zh_CNChinese en_USEnglish pt_BRPortuguese arArabic ru_RURussian

Solicite un presupuesto rápido

Nos pondremos en contacto con usted en el plazo de 1 día laborable, por favor, preste atención al correo electrónico con el sufijo "@woluntech.com".