Airtac Type TN Series Dual Rod Cylinder with Magnet

Characteristics:

◆ Small size and light weight.

◆ Double shaft can bear higher side loads and no rotation.

◆ There are more mounting holes on the fixed board

◆ Different thread type can be offered according to customers’ requirements, e.g.:BSP, NPT etc.

◆ Needn’t lubricate on piston rod by oil

Airtac Type TN Series Dual Rod Cylinder with Magnet

TN double rod air cylinder acts as double acting and has attached magnetic ring. It has used the dual rod construction in order to easily reach non-rotating accuracy. The working media is air and its operating temperature ranges from 0℃ to 70℃. Motivated by strong awareness of quality and market, Wolun company aims at creating high quality products for customers.

Producto Features

1、Double shaft design, double output than single shaft cylinder；

2、High non-rotary precision and small rod end deflection

3、Sliding support guide bearing, no need extra grease, good guiding performance.

4、Multiple position mounting holes in guide plate

5、Front and back mounting holes in cylinder tube, multiple mounting options.

6、Stroke can be adjusted accord to the adjustable screw.

Ordering Code

Bore Size(mm)	10	16	20	25	32
Acting Mode	Double Acting
Working Media	Cleaned Air
Working Pressure	0.1~0.9Mpa(1-9kgf/cm²)
Proof Pressure	1.35Mpa(13.5kgf/cm²)
Temperature	-5~70℃
Buffering Mode	Bumper
Port Size	M5*0.8				G1/8”
Body Material	Aluminum Alloy

Bore Size(mm)	Standard Stroke(mm)	Max.Stroke(mm)	Sensor Switch
10	10 20 30 40 50 60 70 80 90 100	100	CS1-J
16	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
20	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
25	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
32	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200

Note: The cylinder with non-standard stroke (within 100mm) the dimension is same asthe cylinder with standard stroke bigger than this non-standard stroke. Forexampie, the cylinder with stroke size 25mm, its dimension is same as thecylinder with standard stroke size 30mm.