PV Union Elbow Push In Tube Fitting

PV Series Union Elbow PV4 6 8 10 12 14 16 Pneumatic L Type elbow fitting Plastic Pipe Connector Quick Fitting

Category Pneumatic Fitting& Air Tube

PV4,PV6,PV8,PV10,PV12,PV14,PV16 Pv Series Right Angle Union Elbow Quick Connector Air Tube Pneumatic Fittings

Pneumatic fitting, push in fitting union elbow is used to connect two tubes with equal tubing diameter on both ends at a 90° angle, can be used to change direction of tubing easily. Union elbow pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″.
All Pneuflex’s push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Technical Specification

Fluid		Air. if you use liquid please contact factory
Max Working Pressure		1.32Mpa(13.5kgf/cm2 )
Pressure Range	Normal Working Pressure	0~0.9Mpa(0~9.2kgf/cm2)
	Low Working Pressure	-99.99~0Kpa(-750~0mmHg )
Ambient Temperature		0~60ºC
Application Pipe		PU tube, Nylon tube
Color of Release		Black/Blue/White
Material of Core		Plastic/Zinc alloy
Modle Number		PV4,PV6,PV8,PV10,PV12,PV14,PV16