PE Union Tee Push In Tube Fitting

Category Pneumatic Fitting& Air Tube

Characteristics

◆ Quick installation, simple and flexible, space-saving.

◆ The tube ftting comes in a wide variety of models to meet all your needs in pneumatic piping.

◆ Even after installation, the direction of tubing can be changed freely.

◆ The release ring adopts the llipse design to make it more convenient and labor-saving for disconnection.

◆ All taper threads are pre- coated with Teflon with fine seal performance.

◆ All fttings are equipped with the internal hexagonal holes. It is easy for them to be mounted in the narrow places.

Pneumatic fitting, push in fitting union tee connect two tubes at 90-degree angles to a third tube with same tube diameter. Union tee push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″.
All Wolun’s push-in fittings,pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Black, White
Body Color: Black or Grey.

Technical Specification

Fluid		Air. if you use liquid please contact factory
Max Working Pressure		1.32Mpa(13.5kgf/cm2 )
Pressure Range	Normal Working Pressure	0~0.9Mpa(0~9.2kgf/cm2)
	Low Working Pressure	-99.99~0Kpa(-750~0mmHg )
Ambient Temperature		0~60ºC
Application Pipe		PU tube, Nylon tube
Color of Release		Black/Blue/White
Material of Core		Plastic/Zinc alloy
Modle Number		PE4,PE6,PE8,PE10,PE12,PE14,PE16