ISO15552 Cp96 Series 32-125mm Best Quality Pneumatic Cylinder

Cp96 Series Air Cylinder Standard Cylinder SMC Type

SMC Cylinder Cp96 ISO Standard (15552) ISO Cylinder

Category Cilindro pneumático

Cp96 Tie Rod Cylinder is a double acting cylinder with high accuracy cover and tie rod nut to improve mounting accuracy and extend the cylinder life

ISO 15552 Standard Pnematic cylinder CP96 Series Bore size(mm) 32 40 50 63 80 100 125 mm China factory

Product Description

1. CP96, profile tube design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from ø32 to ø100mm. The series is available with a single or double rod in 6 bore sizes from ø32 to ø100mm.

2. The air cushion and bumper cushion combination greatly reduces noise at the end of stroke. High accuracy covers and tie rod nuts improve mounting accuracy and extend the cylinder life.

3. Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.

4. Standard strokes range from 25 to 800mm.

Product Specification

Bore(mm)	32	40	50	63	80	100
working medium	clean air(40μm filteration)
Acting type	Double acting
Proof pressure	1.5Mpa
Max. Working pressure	1.0Mpa
Min. Working pressure	0.05Mpa
Working temperature	Without auto switch: -20 to 70ºC(No freezing) with auto switch: -10 to 60ºC(No freezing)
Lubrication	Not required(Non-lube)
Speed range	50 to 1000mm/s
Stroke tolerance	Up to 500 stroke: 0 to +2.0, 501 to 1000 stroke: 0 to +2.4, 1001 to 1500 stroke: 0 to +2.8, 1501 to 2000 stroke: 0 to +3.2
Cushion type	Air cushion on both ends + Bumper cushion
Port size	G1/8	G1/4	G1/4	G3/8	G3/8	G1/2
Mounting	Basic, Axial foot-LB, Rod flange-FA, Head flange-FB, Single clevis-CA, Double clevis-CB
Non-rotating accuracy	±0.5°		±0.5°		±0.3°
Allowable rotational torque	0.25N·m	0.45N·m	0.64N·m		0.79N·m

Stroke of Cp96 Series SMC Type Air Cylinder Pneumatic

Bore Size (mm)	Standard Stroke (mm)	Max. Std Stroke	Max. Stroke
32	25, 50, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500	1000	1500
40	25, 50, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800	1200	1500
50	25, 50, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000	1200	1500
63		1500	1800
80		1500	1800
100		1500	1800
125		1500	1800

Ordering Code CP96 Series ISO15552 Standard Cylinder

CP96S D B 32X 100 – C W

CP96S→ Series Code	S: Standard cylinder	K: Non-rotating rod type
D→ Magnet	Nil: Without magnet	D: With magnet
B→ Mounting	B: Basic	L: Axial foot
	F: Rod flange	G: Head flange
	C: Single clevis	D: Double clevis
	*Mounting brackets can be purchased separately
63→ Bore size	32: 32mm	40: 40mm
	50: 50mm	63: 63mm
	80: 80mm	100: 100mm
100→ Stroke
C→ Air cushion on both ends + Bumper cushion
W→ Rod type	Blank: Single rod	W: Double rod

Product Parts

cp96 cylinder Inner structure and material ofmajor parts

Number	Nome	Number	Nome
l	Rod nut(Carbon steel\Stainless steel)	9	O ring(TPU\NBR)
2	piston rod(Carbon steel\Stainless steel)	10	Wear ring(Wear resistant material)
3	Front cover packing(TPU)	11	Magnet(Plastic)
4	Bushing(Wear resistant material)	12	Buffer gasket(TPU\NBR)
5	Front cover(Aluminum alloy)	13	Bolt(Carbon steel)
6	Cushing O- ring(NBR)	14	Back cover(Aluminum alloy)
7	Barrel(Aluminum alloy)	15	Screw(Carbon steel)
8	Piston(Aluminum alloy)