PH Single Banjo Push In Tube Fitting

Category Теги , ,

Characteristics

◆ Quick installation, simple and flexible, space-saving.

◆ The tube ftting comes in a wide variety of models to meet all your needs in pneumatic piping.

◆ Even after installation, the direction of tubing can be changed freely.

◆ The release ring adopts the llipse design to make it more convenient and labor-saving for disconnection.

◆ All taper threads are pre- coated with Teflon with fine seal performance.

◆ All fttings are equipped with the internal hexagonal holes. It is easy for them to be mounted in the narrow places.

ASK FOR A QUOTE

Pneumatic fittings, push in fittings male banjo elbow is used to connect a tubing at a 90° angle to a female threaded port. Tightened on the top of the male banjo elbow fitting by use a flat wrench or a Allen wrench at a confined space. Male banjo elbow pneumatic fitting can be rotated after installation to allow for variations in piping direction. Pneumatic push to connect fitting male banjo elbow is made of strong thermoplastic (PBT) and has stainless steel tube gripping claw; threaded component is made of nickel plated brass. Pre-coated Teflon threads are ready to use without additional sealing. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8″ to 1/2″. External tightening with a flat wrench. Thread sizes range from M5, M6, R, PT, BSPT 1/8 to R, PT, BSPT 1/2.

All Wolun’s push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Related products

ru_RURussian
ru_RURussian zh_CNChinese en_USEnglish es_COSpanish pt_BRPortuguese arArabic

Запросите быструю цитату

Мы свяжемся с вами в течение 1 рабочего дня, пожалуйста, обратите внимание на электронную почту с суффиксом "@woluntech.com".