CS1-J,CS1-JP,CS1-JN Magnetic sensor for SDA compact cylinder

Airtac Magnetic Switch CS1-F/U/S/J/G/M Cylinder Magnetic Sensor Switch Cylinder Sensor

Refer to the cylinder switch precautions, when using magnetic induction switch, it should not exceed the specifications limit.
In the usage of two-wire magnet switch, it must be connected with the load, otherwise it will cause the damage to the switch.
When using DC power supply, the brown wire should be connected to the positive potential(+), and the blue wire should be connected to the negative potential-). Otherwise, the indicator light of the switch will not light, but the sensor switch can work normally. And the switch will not be damaged, as long as the two lines are reversed, the indicator light will work normally

CS1-J Magnetic Switch Magnet Sensor Proximity Sensor Pneumatic Cylinder Sensor Pneumatic Parts SMC Airtac type Switch Magnetic

General Introduction

Reed sensor also called magnetic switch,reed sensor is applicable for position determination of pneumatic and/or hydraulic cylinder and piston pump.lt
also can be usedslinit switch. When the magnetic object approaches, the reed closes and sends out switch signal through magnificatio.
Compared with inductive sensor, it h tlie following strongpoints: can be installed in metal colsely and side by side and detect through met
al object. Its detection distance subjects to the intensity of magnetic field of detected object. Reed sensor is not applicable in the occasi
on of sevee vibration.

Product Feature

1.The CS1-J series magnetic switches are used for SDA Compact cylinders.
2. The default length of cable is 1.5meter, more length can be selected,like 2m,3m,4m,5m…
3.Mounting it conveniently on the cylinder.

Ordering Code

MODEL:	CS1-J-2

CS1	–	M	–	2
Magnetic sensor		J:Basic two cables		Length of cable
		JB:Normal closed		Blank:1.5m
		Three cables		2m
		JN:NPN type		3m
		JP:PNP type		4m
				5m

Characteristic

Characteristic	type
	CS1-J	CS1-JB	CS1-JN	CS1-JP
Switch logic	SPST NO	SPST NC	Electrical Non-contact; NO
Sensor type	Contact-reed style		Non-contact solid NPN	Non-contact solid PNP
Opreating voltage	5-240V DC/AC	5-120V DC/AC	5~30V DC
Switching current	100mA max		200mA max
Contact rating	10W max		6W max
Internal current consumption	Non		20mA max@24V (Switch active)
Voltage drop	2.5V max@100mA		0.5V max@200mA
Leakage current	Non		0.01mA max
Indicator	Red LED		Red LED	Green LED
Cable	3.2Ф, 2C, Brown-oil resistance (PVC)		3.2Ф, 3C, Black-oil resistance (PVC)
Sensitivity (Note 1)	40Gauss
Max.switch frequency	200Hz		1000Hz
Temperature range	-10~70℃
Shock (Note 2)	30G		50G
Vibration (Note 3)	9G
Protection classfication	IEC 529 IP67(NEMA6)
Protection circuit	Without		With protection circuit
Circuit diagram