CS1-U,CS1-UP,CS1-UN Magnetic sensor for SC,SU,SI standard cylinder

Cylinder Sensor Switch Pneumatic Magnetic Switch CS1 Magnetic Switch Cylinder Induction Switch CS1-F CS1-U CS1-J Sensor
Magnetic Sensor Switch
WOLUN Air Cylinder Magnetic Sensor Switch CS1-U DC10-30V 200mA 10W NO 2-Wire Red LED Light CE
Airtac Type Magnetic Switch CS1-U Air Pneumatic Cylinder Magnetic Reed Switch Sensor with LED Indicator
分类

Magnetism Switch Model ：CS1-U,CS1-F,CS1-J

ASK FOR A QUOTE

Airtac Type Pneumatic Parts Air Cylinder Magnetic Reed Switch Sensor CS1-F/CS1-U/CS1-J/CS1-S/CS1-G/CS1-M

 

Product Description

Magnetic Switch for Pneumatic Cylinders
CS1-F for SC/ SU/ MAL / MA Cylinder
CS1-U for SC/ SU / MAL/ MA Cylinder
CS1-J for SDA / TDA / TN Cylinder
D-Z73 for CXS cylinder

Product Feature

1.The CS1-U series magnetic switches are used for SC,SU,Sl standard cylinders

2.The default length of cable is 1.5meter, more length can be selected,like 2m,3m,4m,5m…Non-standard can be customized

3.Mounting it conveniently on the cylinder.

Ordering Code

MODEL: CS1-U-2
CS1 –  S  –     2
Magnetic sensor U:Basic two cables Length of cable
UB:Normal closed Blank:1.5m
Three cables 2m
UN:NPN type 3m
UP:PNP type 4m
5m

Precautions Before Using Cylinder Switches

Refer to the cylinder switch precautions, when using magnetic induction switch, it should not exceed the specifications limit.

In the usage of two-wire magnet switch, it must be connected with the load. otherwise it will cause the damage to the switch.

When using DC power supply, the brown wire should be connected to the positive potential(+), and the blue wire should be connected to the neaative.potential(-). Otherwise, the indicator light of the switch will not light, but the sensor switch can work normally. And the switch will not be damaged, as long as the two lines are reversed, the indicator light will work normally.

Technical Specification

Specification

type

CS1-U

CS1-UB

CS1-UN

CS1-UP

Switch logic

SPST NO

SPST NC

Electrical Non-contact; NO

Sensor type

Contact-reed style

Non-contact solid NPN type

Non-contact solid PNP type

Opreating voltage

5-240V DCIAC

5-120V DC/AC

5~30VDC

Switching current

100mA max

200mA max

Contact rating

10W max

6W max

Internal current consumption

NO

20mA max@24V (Switch active)

Voltage drop

2.5V max@100mA

0.5V max@200mA

Leakage current

NO

0.01mA max

Indicator

Red LED

Green LED

Red LED

Green LED

Cable

3.80, 2C, Brown-oil resistance (PVC)

3.8Ф, 3C, Black-oil resistance (PVC)

Sensitivity (Note 1)

60Gauss

Max.switch frequency

200Hz

1000Hz

Temperature range

-10~70℃

Shock (Note 2)

30G

50G

Vibration (Note 3)

9G

Protection classfication

IEC 529 IP67(NEMA6)

Protection circuit

Without

With protection circuit

Circuit diagram

Airtac CS1-U Pneumatic Air Cylinders Magnetic Reed Switch Sensor LED Indicator

Air Pneumatic Cylinder Magnetic Reed Switch Sensor CS1-U

Suitable for round tube cylinder

QD connector diagram

Note:

Standard magnet for measurement:Ф15.5xФ8x5T (orthorhombic rubber magnet).

Sine wave/X. Y. Z 3 axial/3 loops (each direction) /11ms.

3. The complex amplitude is 1.5mm/10Hz~55Hz~10Hz (reciprocating for 1 minute) /X, Y, Z 3 axial/hour (each cycle).

We can supply different kinds of Magnetic switch

Model – Cylinder Series  –  Accessory
CS1-F SC\MAL\MA\CM2\CJ2\C85 With
CS1-U SC\MAL\MA\CM2\CJ2\C85 With
CS1-S MAL\MA\CM2\CJ2\C85 With
CS1-J SDA\TN
CS1-G SDA\STMB
CS1-M DNC\CXS\ADVU\MHZ2

 

Related products

ta_LKTamil
ta_LKTamil en_USEnglish es_COSpanish pt_BRPortuguese arArabic ru_RURussian viVietnamese id_IDIndonesian thThai aryMoroccan Arabic bn_BDBengali tr_TRTurkish

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@woluntech.com”.