SMC Type CG1/CDG1 Mini Air Cylinder

Category Pneumatic Cylinder

The CG1 Mini Air Cylinder tube is made of high-strength aluminum alloy and is anodized on the surface, corosion resistance and wear resistance;

Standard CDG1-Z single-rod double-acting (new)20,25,32,40,50,63,80,100

Single-acting (telescopic) 20, 25, 32, 40; CG1W-Z double-rod double-acting 20, 25,32, 40,50, 63,80, 100

Stroke Lengths: 5.10,15.20,25,30.35.40,45.50.75,100,110.120.130mm
Operating Pressure: 0.05-1.0 MPa
Speed:30-700mm/s:50~1000mm/s;
Working Environment Temperature: -10 to 60°C

CG1 Series Flat-end Aluminium Alloy Mini Pneumatic Air Cylinder

Features for cG1 Mini Air Cylinder

1.The Cei viniAir Cvinder tube is made of hioh-strenath aluminum alov and is anodized on the surace. coosion resistance and wear resisiance
2. The front and rear covers and the cylinder tube are connected by fine thread, which is convenient to assemble;
3. The dustproof sealing ring is made of polyurethane material, with good strength and wear resistance, long service life,
4. The piston sealing ring has small structure, stable operation, low dynamic friction and static friction resistance,
5. There is a fixed anti-colision pad inside the CG1 Mini Air Cylinder to reduce the reversing impact

Ordering code for CDG1 Pneumatic cylinder

CDG1	L	N	25	–	100
Magnet Code	Mounting Type	Type	Bore		Stroke
Blank :Without Magnet	B:Basic Type	N:non-lube /rubber buffer	20:20mm
D:With Magnet	L:Axial Foot Base	A:non-lube / air buffer	25:25mm
	F:Rod Flange		32:32mm
	G:Non Rod Flange		40：40mm
	U:Rod Trunnion		50：50mm
	T:Non Rod Trunnion		63：63mm
	D:Double Earring		80：80mm
	ф80, ф100 have no U/T type		100：100mm

Technical Parameters for CDG1 Pneumatic Cylinder

Standard CDG1-Z single-rod double-acting (new) 20,25,32,40,50,63,80,100

Single-acting (telescopic) 20, 25, 32, 40;

CG1W-Z double-rod double-acting 20, 25,32, 40, 50, 63, 80, 100

Stroke Lengths: 5,10,15,20,25,30,35,40,45,50,75,100,110,120,130mm

Operating Pressure: 0.05-1.0 MPa
Speed:30-700mm/s;50-1000mm/s;
Working Environment Temperature: -10 to 60°C

Specification for CDG1 Pneumatic cylinder

Bore size(mm)	20	25	32	40	50	63	80	100
Acting type	Double acting,Single rod
Working medium	Clean air(40um Filteration)
Proof pressure	1.5Mpa
Max. working pressure	1.0Mpa
Min. working pressure	0.05Mpa
Working temperature	without auto swtich: -10ºC to 70ºC with auto switch: -10ºC to 60ºC(No freezing)
Speed range	50 to 1000mm/s						50 to 700mm/s
Stroke tolerance	Up to 1000st^+1.4mm, Up to 1500st^+1.8mm
Cushion	Rubber bumper, Air cushion
Mounting	Basic, Basic(without trunnion mounting female thread), Axial foot, Rod flange, Head flange, Rod trunnion, Head trunnion, Clevis