PD RunTee İtmeli Tüp Bağlantısı

Push in Fittings Pd Male Run Tee Pneumatic Fittings Tube Fittings

Push-in Tubing O.D: 4mm，6mm，8mm，10mm，12mm，14mm，16mm
Thread Size: R, PT, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon
Seal, O-ring: NBR
Çalışma Basıncı: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC

Pneumatic fittings, push in fittings male run tee is used to connect a female threaded connection to a straight tube and to a second tube at a 90-degree angle. Male run tee pneumatic fitting with threaded connections can be rotated after installation to allow for variations in piping direction. Pneumatic push to connect fitting male run tee is made of strong thermoplastic (PBT) and has stainless steel tube gripping claw; threaded component is made of nickel plated brass. Pre-coated Teflon threads are ready to use without additional sealing. External tightening with a flat wrench. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″. Thread sizes range fromM5, M6, R, PT, BSPT 1/8 to R, PT, BSP T1/2.
All Wolun’s push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Black, White
Body Color: Black or Grey.

Teknik Özellikler

Akışkan		Air. if you use liquid please contact factory
Max Working Pressure		1.32Mpa(13.5kgf/cm2 )
Pressure Range	Normal Working Pressure	0~0.9Mpa(0~9.2kgf/cm2)
	Low Working Pressure	-99.99~0Kpa(-750~0mmHg )
Ambient Temperature		0~60ºC
Application Pipe		PU tube, Nylon tube
Color of Release		Black/Blue/White
Material of Core		Plastic/Zinc alloy
Modle Number		PD4-M5/01/02/03/04,PD6-M5/01/02/03/04,PD8-01/02/03/04

Products of PD Male Run Tee

Part No.	Push in Tubing O.D	Male Thread Size
PD04-M5	4mm	M5 x 0.8
PD04-M6	4mm	M6 x 1
PD04-01	4mm	R, PT, BSPT 1/8
PD04-02	4mm	R, PT, BSPT 1/4
PD06-M5	6mm	M5 x 0.8
PD06-M6	6mm	M6 x 1
PD06-01	6mm	R, PT, BSPT 1/8
PD06-02	6mm	R, PT, BSPT 1/4
PD06-03	6mm	R, PT, BSPT 3/8
PD06-04	6mm	R, PT, BSPT 1/2
PD08-01	8mm	R, PT, BSPT 1/8
PD08-02	8mm	R, PT, BSPT 1/4
PD08-03	8mm	R, PT, BSPT 3/8
PD08-04	8mm	R, PT, BSPT 1/2
PD10-01	10mm	R, PT, BSPT 1/8
PD10-02	10mm	R, PT, BSPT 1/4
PD10-03	10mm	R, PT, BSPT 3/8
PD10-04	10mm	R, PT, BSPT 1/2
PD12-01	12mm	R, PT, BSPT 1/8
PD12-02	12mm	R, PT, BSPT 1/4
PD12-03	12mm	R, PT, BSPT 3/8
PD12-04	12mm	R, PT, BSPT 1/2
PD14-02	14mm	R, PT, BSPT 1/4
PD14-03	14mm	R, PT, BSPT 3/8
PD14-04	14mm	R, PT, BSPT 1/2
PD16-02	16mm	R, PT, BSPT 1/4
PD16-03	16mm	R, PT, BSPT 3/8
PD16-04	16mm	R, PT, BSPT 1/2
PD5/32-M5	5/32″	M5 x 0.8
PD5/32-M6	5/32″	M6 x 1
PD5/32-01	5/32″	R, PT, BSPT 1/8
PD5/32-02	5/32″	R, PT, BSPT 1/4
PD1/4-M5	1/4″	M5 x 0.8
PD1/4-M6	1/4″	M6 x 1
PD1/4-01	1/4″	R, PT, BSPT 1/8
PD1/4-02	1/4″	R, PT, BSPT 1/4
PD1/4-03	1/4″	R, PT, BSPT 3/8
PD1/4-04	1/4″	R, PT, BSPT 1/2
PD5/16-01	5/16″	R, PT, BSPT 1/8
PD5/16-02	5/16″	R, PT, BSPT 1/4
PD5/16-03	5/16″	R, PT, BSPT 3/8
PD5/16-04	5/16″	R, PT, BSPT 1/2
PD3/8-01	3/8″	R, PT, BSPT 1/8
PD3/8-02	3/8″	R, PT, BSPT 1/4
PD3/8-03	3/8″	R, PT, BSPT 3/8
PD3/8-04	3/8″	R, PT, BSPT 1/2
PD1/2-01	1/2″	R, PT, BSPT 1/8
PD1/2-02	1/2″	R, PT, BSPT 1/4
PD1/2-03	1/2″	R, PT, BSPT 3/8
PD1/2-04	1/2″	R, PT, BSPT 1/2