Airtac cylinder mounting accessories are the same as ISO cylinder accessories, but the implementation standards are different, especially the tail mounting accessories, such as CA, CB, SDB, and FA/FB flange brackets, etc., have slightly different installation dimensions.
Special attention: cylinder accessories of different standards must not be mixed, otherwise the mounting holes will be dislocated. For the connection accessories of the piston rod end, such as Y clevis rod ends, rose joint, floating joint, etc., ISO standard and Airtac standard can be used interchangeably.
Unlike ISO cylinder mounting accessories, Airtac cylinder accessories are mostly made of lower cost cast iron, while ISO cylinder mounting accessories are mostly made of lightweight aluminum alloy.
ISO pneumatic cylinder mounting accessories are essential mounting hardware when connecting and installing pneumatic cylinders. Our ISO cylinder mounting accessories are basically suitable for all ISO15552 or ISO6431 standard cylinders.
ISO cylinder mounting accessories include CA male bracket, CB female bracket, SDB hinge mounting bracket and other cylinder base mounting accessories, as well as flange brackets for front and rear cover, TC Trunion mounting bracket, and Y Clevis rod ends for cylinder rod end connection, rose joints, floating joints, etc.
The selection of cylinder accessories should be based on the actual installation location and required functions. If you need to rotate after passing the cylinder tail, you can choose CA, CB, SDB, if it is fixed, you can choose FA/FB flange.
Vietnamese 
English 
Spanish 
Portuguese 
Arabic 
Russian 
Indonesian 
Thai 
Moroccan Arabic 
Bengali